REPLACING CV BOOT
This is just like replacing any other cv boot.
Once the front axel has been removed.
1. Cut off the metal bands/clamps
2. Clean the axel and joint
3. Apply the grease to the joint
4. Install the boot
5. Grease the inside of the boot
6. Install the clamps
7. Bolt the front axel back into place
This is just like replacing any other cv boot.
Once the front axel has been removed.
1. Cut off the metal bands/clamps
2. Clean the axel and joint
3. Apply the grease to the joint
4. Install the boot
5. Grease the inside of the boot
6. Install the clamps
7. Bolt the front axel back into place
Sentry Page Protection