SPARK PLUG REMOVAL
Problem - What is the process to pull the spark plugs?
Possibility 1 - The plug wire is attached to the plug boot. First, spin the boot about a 1/4 - 1/2 turn, taking care not to pull the plug wire or over extend it. Then, gently 'rock' the plug boot back and forth and it should snap free of the spark plug. The twisting motion is just to break any seal that might have formed between the boot and cover and the connector tip and plug. After loosening the spark plug, use a piece of stiff vacuum hose about a foot long to slide over the shaft of the spark plug, then pull the hose out with the spark plug stuck in the end of it.
Problem - What is the process to pull the spark plugs?
Possibility 1 - The plug wire is attached to the plug boot. First, spin the boot about a 1/4 - 1/2 turn, taking care not to pull the plug wire or over extend it. Then, gently 'rock' the plug boot back and forth and it should snap free of the spark plug. The twisting motion is just to break any seal that might have formed between the boot and cover and the connector tip and plug. After loosening the spark plug, use a piece of stiff vacuum hose about a foot long to slide over the shaft of the spark plug, then pull the hose out with the spark plug stuck in the end of it.
Sentry Page Protection