GEAR BOX FILLER HOLE
Problem - Is this the oil filler hole and control hole? Do you use teflon tape with the drain hole plug?
Problem - Is this the oil filler hole and control hole? Do you use teflon tape with the drain hole plug?
Possibility 1 - The gear box takes 3.5 litres. I filled from the breather hole from the top next to the slave cylinder. I opened the one you are pointing at to see that the level was correct.
Possibility 2 - Teflon tape is not needed as the plugs are conical and tighten themselves.
Possibility 3 - It is the inspection and filling hole. It is easier to funnel through the breather hole. It does not make a mess and easy to do. You can access the correct holes through the wheel well. I have my car on a hoist and have the air filter box and heat shield removed.
Possibility 2 - Teflon tape is not needed as the plugs are conical and tighten themselves.
Possibility 3 - It is the inspection and filling hole. It is easier to funnel through the breather hole. It does not make a mess and easy to do. You can access the correct holes through the wheel well. I have my car on a hoist and have the air filter box and heat shield removed.
Sentry Page Protection